Copper Bonded Earthing Threaded Rod is made from low carbon steel with a high tensile strength of at least 600 N/mm2. Low carbon steel core are molecularly tended with 99.9% pure electrolytic copper.  

In the copper bonded earthing threaded rods, threads on the rods are formed externally. In the copper bonded earthing threaded rod the top and the bottom are threaded using the Cold rolling process. This process is done by forming a wave on both the top and the bottom of the rod. This process is accepted worldwide as it makes the threads much stronger. This threading process also eliminates the risk of breaking off the threads while putting the rods into the ground. 

Among the threading processes, cold-rolling is a superior one compared to the cut thread process. In the cut thread process the strength of the rod is minimized by the shedding procedure, while in the cold rolling process the strength of the rod remains the same. 

These sectional earthing rods are threaded on both ends to allow rod-to-rod connections with couplings to meet customers’ specific needs. Such procedure permits up to 100-feet depths to be reached with no damage to the threads or the couplings.  

Rod Dimension 
(DIA x LENGTH)

Length in feet

Actual Rod Dia “S”

Thread Dia “T”

Product Code

9.5 x 1800

6

9.5

-

AI1-CBR- 018

14 x 1200

4

12

14

  AI1-CBR - 1412

14 x 1500

5

12

14

  AI1-CBR - 1415

14 x 1800

6

12

14

  AI1-CBR - 1418

14 x 2000

6.66

12

14

  AI1-CBR - 1420

14 x 2400

8

12

14

  AI1-CBR - 1424

5/8” x 4’ or16mm x 1200

4

14.2

5/8”

AI1-CBR - 112

5/8” x 5’ or16mm x 1500

5

14.2

5/8”

AI1-CBR - 115

5/8’ x 6’ or16mm x 1800

6

14.2

5/8”

AI1-CBR - 118

5/8” x 8’ or16mm x 2400

8

14.2

5/8”

AI1-CBR - 124

5/8” x 10' or16mm x 3000

10

14.2

5/8”

AI1-CBR - 130

5/8” x 4’ or16mm x 1200

4

16

5/8”

AI1-CBR - 312

5/8” x 5’ or16mm x 1500

5

16

5/8”

AI1-CBR - 315

5/8” x 6’ or16mm x 1800

6

16

5/8”

AI1CBR - 318

3/4” x 4’ or19mm x 1200

4

17.2

3/4”

AI1-CBR - 212

3/4” x 5' or19mm x 1500

5

17.2

3/4”

AI1-CBR - 215

3/4” x 6’ or19mm x 1800

6

17.2

3/4”

AI1-CBR - 218

3/4” x 8’ or19mm x 2400

8

17.2

3/4”

AI1-CBR - 224

3/4” x 10’ or19mm x 3000

10

17.2

3/4”

AI1-CBR - 230



 

  copper-bonded-grounding-rod

 

 

 

 

  

Features of Copper Bonded Earthing Threaded Rod

- Perfectly bonded Copper Bonded Earthing Threaded Rod will lost longer, drive easier and will not crack.

- In Copper Copper Bonded Earthing Threaded Rod, Copper purity is 99.95%.

- The Copper Bonded Earthing Threaded Rod is fully covered with copper cladding without any cracks, holes, cavities etc.

- Threads are rolled by roll threading process, which ensures that when copper covers is maintained, at the root of the thread, Roll thread gives greater strength than cut thread.

- Thread rolling process raises the surface of the rod so that Thread dia. (T) is greater than (S)

- Magnetic conducting rate is low. Thus reducing the lightning induction.

- Good tensile strength in Copper Bonded Earthing Threaded Rod, over 600N/mm2.

-Resist corrosion better than galvanized rods allowing for a 30-year service life in most soils

- Corrosion resistance while providing the lowest resistance to ground.

- The Copper Bonded Earthing Threaded Rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.

- Copper layer is over 0.150mm (copper layer thickness can be on request, such as 0.10mm, 0.25mm, 0.100mm, 0.150mm, 0.200mm, 0.254mm etc. upto 0.850mm). (Please note that 0.254mm is also known as 254 micron or 0.10mm as 100 micron but if our customer request for Standard Micron i.e 15-25 micron, than we also manufacture in standard micron)

Packaging: We maintain Export Sea worthy packing i.e. it firstly packed in Plastic Packing with Thread protection in PVC Cap and then into Hard PVC Plastic pack. We also pack in wooden Packing on request.

 copper-clad-grounding-rod-packing   copper-claded-grounding-rod-packing  copper-bonded-grounding-rod-packing

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.


Some Our Estimated Key Customers are
 

 

Download Our PDF File 


Pdf  Copper Bonded Earthing Rod Manufacturer
 

 

Don't miss the latest news! Connect with us.    Exothermic Welding - Join us at Facebook for Latest News   Join us at Google Plus  Image result for youtube

 

 

Please visit our Other Websites for Copper Bonded Rod, Exothermic Weld Powder, Copper Braids, Copper Laminated Connectors and Other Products::

www.amiableimpexindia.com

www.aiearthing.net

www.aiimpex.com

www.copperbondedrod.com

www.grounding-rod.com

www.earth-rod.com

www.exothermicweldpowder.in

www.exothermic-welding.in

www.exothermic-welds.com

www.exothermicwelds.com

www.copperbraided.com

www.copperjumper.com